Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Panel Replacement Cost in Seven Hills?
Panel replacement in Seven Hills typically runs $250 – $500 for a single sectional panel, including the panel, hardware transfer and adjustment. A single-car door panel usually lands near the lower end, while a double-car panel with windows or a factory finish pushes toward the top. That range is an estimate for the Seven Hills market; the written estimate we provide after looking at your door sets the final price.
If you’re standing in the garage looking at a dented, cracked or rusted section, the good news is that panels are replaceable on their own. You don’t need a whole new door just because one section took a hit. We work on the brand already in your garage, so the replacement panel matches what’s hanging there now. Call (844) 443-4563 and we’ll get an estimate scheduled. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Panel Replacement Cost Breakdown (2026)
Here’s how the numbers shake out for a typical Seven Hills panel job. Ranges are estimated for this market and cover the panel itself plus the labor to swap it in and realign the door.
| Line Item | Typical Estimated Range |
|---|---|
| Single panel replacement (standard steel, single-car) | $250 – $350 |
| Single panel replacement (double-car door) | $300 – $450 |
| Panel with decorative windows or inserts | $380 – $500 |
| Labor to remove old panel and reset hardware | Included in the ranges above |
| Replacing two or more panels in one visit | Quoted per job; often lower per panel than a single |
| Panel replacement on a discontinued or legacy door | Quoted after we source the matching panel |
| Track realignment if the door is binding after the swap | $120 – $240 |
| Roller replacement if the old rollers are worn | $110 – $220 |
The $250 – $500 headline for a single panel is the number most Seven Hills homeowners land in. What moves you up or down within that: the width of the panel, whether it carries glass or a window insert, the finish (a factory color or embossed pattern costs more than a plain steel face), and whether the door is a model we can still get panels for. Older doors sometimes need a little searching to find a match, and if the panel is out of production we’ll tell you straight rather than guess.
One more thing worth knowing: replacing a panel is almost always cheaper than replacing the door. A full new door installation runs $700 – $2200, so unless the door is structurally shot, a panel swap is the sensible call.
What Affects Panel Replacement Pricing in Seven Hills
A few local and mechanical factors swing the estimate more than others:
- Door age and model availability. Panels for popular brands like Clopay, Amarr, Wayne Dalton and Raynor are generally easier to source than panels for an off-brand or discontinued door. If the model is still in production, the job is straightforward. If it isn’t, the search for a matching panel takes time and the quote reflects that.
- Panel width and door type. A single-car door panel is shorter and lighter than a double-car panel, which means less material and less labor. Double-car panels cost more to make and more to handle.
- Windows, inserts and finish. A panel with decorative windows or a factory finish carries a higher material cost than a plain steel section. If your door has a specific color or stamped pattern, matching it takes the right panel, not a generic one.
- Condition of the surrounding hardware. If the door is binding, the tracks are bent or the rollers are shot, that shows up when we swap the panel. We’d rather fix a realignment or a roller set in the same visit than have you call back a week later. Track realignment runs $120 – $240 and roller replacement $110 – $220 when needed.
- Hail and storm damage. Seven Hills and the surrounding Front Range get hail that dents steel panels and cracks vinyl ones. A single dented section is a panel job; a door with damage across every section may tip toward replacement. We’ll give you both numbers.
- Number of panels in one visit. Replacing two or three panels together often costs less per panel than a single one, because the setup and travel are shared once.
Should You Replace One Panel or the Whole Door?
Replace one panel when the damage is isolated, the door is otherwise sound, and the panel is still available. Replace the whole door when the damage is widespread, the panels are discontinued, or the frame and hardware are failing. A single-panel job costs $250 – $500; a new door installation runs $700 – $2200, so the decision usually comes down to how much of the door is actually damaged.
We give you both options on the same visit and let you decide. If a panel swap keeps your door working for years, that’s the honest recommendation. If you’re chasing a discontinued panel for the third time, we’ll say so. Our technicians have up to 15 years of experience with the eight major brands we see in Seven Hills garages: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman and Raynor.
What Does the Panel Swap Itself Involve?
It’s a mechanical job with real weight and spring tension involved, so we handle it rather than walk you through a DIY version. Here’s what a typical visit looks like:
- We look at the door, confirm which panel or panels need replacing and check that the surrounding hardware is sound.
- The door is secured and the spring tension is managed safely before anything comes apart. Torsion springs and cables hold a lot of stored force and can cause serious injury if handled without the right tools and training, which is why we always recommend a trained technician for this part.
- The damaged panel comes out and the new one goes in, with hinges and hardware transferred.
- We realign the door, check the rollers and tracks, and run it up and down to confirm it moves cleanly.
- We test the opener cycle so the door operates the way it should.
Most single-panel jobs are done in one visit. If a panel needs to be ordered, the timeline depends on availability, and we’ll give you a clear sense of that when we quote.
How to Save on Panel Replacement
There’s no secret to a lower panel bill, just a few practical moves:
- Fix a dented panel before it rusts. A small dent is a cheap swap. Once moisture gets behind the steel and the panel rusts through, the job is the same cost but the damage is worse.
- Bundle panels into one visit. If two or three sections are damaged, replacing them together costs less per panel than spreading the work over multiple visits.
- Ask about matching panels while the model is current. Panels for in-production doors are easier and cheaper to source than discontinued ones.
- Get the estimate in writing. Our estimate is free and the written quote sets the price, so there are no surprises when the job is done.
If the door is binding or the tracks are bent, mention it when you call. Fixing a small realignment alongside a panel swap usually costs less than a separate visit later. Call (844) 443-4563 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Do You Carry Panels for My Brand?
We work on the brand already in your garage, which matters when you need a panel that matches the rest of the door. We’re familiar with the panels and hardware on Clopay, Amarr, Wayne Dalton, Raynor, LiftMaster, Chamberlain, Genie and Craftsman doors, and we supply garage door parts directly, so most jobs don’t wait on a long order. If your door is a model we can’t match, we’ll tell you upfront and lay out your options, including a full replacement and a repair path.
If you’re not sure what brand you have, we can usually tell from the panel profile and the opener. LiftMaster and Chamberlain openers (the myQ-connected ones included) are the most common smart-home setups we see in Seven Hills garages, and the older Genie and Craftsman units show up just as often. Whatever’s there, we’ve worked on it.
Why Choose Garage Door Repair Seven Hills for Panel Work?
We’re garage door specialists, not generalists. That means panel work, spring repair, opener service, installation and parts all come from one company, so you’re not juggling a handyman for the panel and someone else for the opener. From broken spring to brand-new door, we cover the full lifecycle. And because we sell parts directly, a replacement panel or hinge doesn’t sit on backorder while your door stays dented.
Spring repair is the service that most separates a garage door specialist from a generalist, and it’s often the reason a panel job turns into a track or roller fix once we look closely. We handle that work in-house. Our technicians have up to 15 years of experience with the equipment actually installed in Seven Hills homes. For a broader look at what we do, see our garage door repair Seven Hills page.
FAQs – Panel Replacement Cost
How much does panel replacement cost in Seven Hills?
Single-panel replacement in Seven Hills typically costs $250 – $500, depending on the panel width, finish and whether it has windows. Double-car panels and windowed panels sit near the top of that range. Call (844) 443-4563 for an exact quote. Estimates are free.
Is it cheaper to replace one panel or the whole door?
Replacing one panel is almost always cheaper: $250 – $500 versus $700 – $2200 for a new door installation. A full replacement makes sense only when the damage is widespread or the panels are discontinued. Call (844) 443-4563 and we’ll quote both options.
Can you replace just a dented panel?
Yes. A single dented section can usually be swapped on its own, and the rest of the door stays as it is. The cost lands in the $250 – $500 range for a standard panel. Call (844) 443-4563 for a free estimate.
Can you come today?
Same-day panel work is often possible depending on scheduling and whether the panel is in stock. Call (844) 443-4563. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Do you have panels for my brand?
We work with panels and hardware from Clopay, Amarr, Wayne Dalton, Raynor and the other major brands, and we source parts directly. If your door is discontinued, we’ll tell you what matches. Call (844) 443-4563. Estimates are free.
What to Do Next
A damaged panel doesn’t mean a new door. In most Seven Hills cases, a single panel swap brings the door back to looking and working right, and the cost stays in the $250 – $500 range. We’ll look at it, give you a written estimate and lay out the options if a replacement makes more sense than a repair. For more detail on the service, visit our panel replacement page. Call (844) 443-4563 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Pricing reflects the Seven Hills market as of 2026. Garage Door Repair Seven Hills offers free estimates – call (844) 443-4563.
Written by the team at Garage Door Repair Seven Hills.
What Our Customers Say
"Track was bent and two of the rollers were shot. He straightened what he could, swapped the rollers for nylon ones, lubricated everything, and had it done in about an hour."
- Kelly Novak"Spring snapped at six in the morning with my car sealed inside and me due at work. Somebody was here by eight thirty and had it fixed that morning. Door's quieter now than it was before it broke."
- Gabriela Reyes"Opener kept reversing halfway down. Turned out to be the safety sensors knocked out of alignment by a bicycle. He straightened them, wouldn't charge me for it, and just asked me to keep them in mind if I need real work later."
- Kevin Kowalski